Large size inflates 515 12" latex balloons and costs £185 plus £25 deposit
Medium size inflates 345 12" latex balloons and costs £140 plus £25 deposit
Small size inflates 115 12" latex balloons and costs £60 plus £25 deposit
All inflation numbers are approximate, as it will depend on the person using the cylinder.
Most good quality latex 12" balloons will last 16 hours from the time of inflation, so it is adviseable not to inflate the balloons too early and definitely not the day before your event.
We will deliver and collect locally for £7
Medium size inflates 345 12" latex balloons and costs £140 plus £25 deposit
Small size inflates 115 12" latex balloons and costs £60 plus £25 deposit
All inflation numbers are approximate, as it will depend on the person using the cylinder.
Most good quality latex 12" balloons will last 16 hours from the time of inflation, so it is adviseable not to inflate the balloons too early and definitely not the day before your event.
We will deliver and collect locally for £7
Operating Instruction for your latex filling
kit - please note you do not require a spanner.
kit - please note you do not require a spanner.
Latex Filling Kit Operating Instructions
Make sure the cylinders are safe and secure. Chain, tie or strap them to something solid.
Screw the filling kit into the cylinder 'finger tight' - DO NOT USE A SPANNER.
Slowly open the cylinder tap anti clockwise.
You might hear a firm 'popping' sound.
You might hear a firm 'popping' sound.
Inflating a latex balloon using the latex filling kit
When the balloon is 'pear shaped' -
stop inflating and tie a knot in the balloon.
stop inflating and tie a knot in the balloon.
After you have finished inflating your balloons, turn the cylinder off, release the helium trapped
in the filling kit and remove the kit before transporting the helium cylinder.
in the filling kit and remove the kit before transporting the helium cylinder.
Place the neck of the latex balloon over the rubber tip, tilt the tip at any angle to begin inflating the balloon.
Do not over fill the foil balloon, leave some creases in the balloon to allow for temperature change.
Hold the neck of the foil balloon
over the nozzle and push back,
release when balloon is fully inflated.
over the nozzle and push back,
release when balloon is fully inflated.
Inflating a foil balloon
If you have any problems inflating your balloons contact us on - 07958 626 229 or email us -
Select the Heligas cylinder that's right for the job our one-stop shop for helium balloon gas
Helium Hire
Here is an example of banner you could have, please click
on the image to see more.
on the image to see more.
Should you wish to contact us via email -----
Balloon Wise 7 Days a week 9.00am - 7.30pm MON-SUN Tel: 01273 410525 Mobile 07958 626 229
Trading Since 1992
No Minimum Order
No Minimum Order
Helium Hire